![]() |
|
|
Product Details:
Payment & Shipping Terms:
|
TEMPERATURE: | Room Temp~200/300 ℃(depend On The Oil Heater) | DIAMETER: | 100 (mm) |
---|---|---|---|
FEED AMOUNT: | 4000~12000 ( Ml/h) | ROTATION SPEED: | 80-390 Rpm |
FILM SYSTEM: | Wiped Filming System | MATERIAL: | Stainless Steel 304 |
High Light: | reflux distillation equipment,fractional distillation machine |
1100 * 500 * 1750 mm Distillation Machine for CBD / THC / Hemp oil
—— Operation
Feed liquid is admitted into still under high vacuum, immediately spread into a very thin film and forced quickly down the evaporation surface. Heated walls and high vacuum drive the more volatile components (distillate) to the external condenser as the less volatile components (residue) continue down the cylinder. The resulting fractions, thus separated, exit through individual discharge outlets. Depending on application, the desired product is either the distillate or the residue fraction. Small amounts of condensable low MW compounds collect in cold trap upstream of vacuum system. For high solvent loads, an optional external condenser may be installed immediately downstream of the still.
TYPE | BML-10 |
MATERIAL | stainless steel 304 |
TEMPERATURE | Room temp~200/300 ℃(depend on the oil heater) |
DIAMETER | 100 (mm) |
HEAT EXCHANGER HTA | 0.12 (m2) |
FEED AMOUNT | 4000~12000 ( ml/h) |
ROTATION SPEED | 80-390rpm |
FILM SYSTEM | Wiped Filming System |
VACUITY | 0. 5-50mbar(depend on the nature of material and vacuum pump) |
FLOOR AREA | length*width*height=1100*500*1750 (mm)(without pump) |
POWER | 3.5KW (without pump) |
VOLTAGE | 220V -60hz |
Distillation is a separation process, separating components in a mixture by making use of the fact that some components vaporize more readily than others. When vapours are produced from a mixture, they contain the components of the original mixture, but in proportions which are determined by the relative volatilities of these components. The vapour is richer in some components, those that are more volatile, and so a separation occurs.
Contact Person: sales