Sales & Support
Request A Quote -
Payment & Shipping Terms:
|MATERIAL:||Stainless Steel 304||TEMPERATURE:||Room Temp~200/300 ℃(depend On The Oil Heater)|
|DIAMETER:||80 (mm)||HEAT EXCHANGER HTA:||0. 58 (m2)|
|FEED AMOUNT:||2000~6000 ( Ml/h)||VOLTAGE:||220V -60hz|
climbing film evaporator,
rotary vacuum film evaporator
2KW Power Wiped Film Evaporator for CBD / THC / Hemp oil / Cannabissativa
Wiped Film Evaporators are horizontal evaporator with wiper basket, gear motors and external condenser.
The vapour nozzle is typically arranged at the upper end of the evaporator in order to facilitate the transfer of the vapours to the external condenser.
Dea offers thin film evaporators from 0.058 to 3 m2 .
|MATERIAL||stainless steel 304|
|TEMPERATURE||Room temp~200/300 ℃(depend on the oil heater)|
|HEAT EXCHANGER HTA||0.058 (m2)|
|FEED AMOUNT||2000~6000 ( ml/h)|
|FILM SYSTEM||Wiped Filming System|
|VACUITY||0. 5-50mbar(depend on the nature of material and vacuum pump)|
|FLOOR AREA||length*width*height=1100*500*1750 (mm)(without pump)|
|POWER||2KW (without pump)|
The technology of wiped film evaporators includes all thermal methods. The typical wiped film evaporator consists of a tubular heat transfer area with an external heating jacket and an internal rotor system. The feed liquor is distributed evenly by a rotating system and its wipers over the heating surface forming a thin liquid film of uniform thickness < 1 mm. The liquid film flows down on a steam or thermal oil heated surface.
Contact Person: sales