![]() |
|
|
Product Details:
Payment & Shipping Terms:
|
Material: | Stainless Steel 304 | Voltage: | 220V-60hz |
---|---|---|---|
Temperature: | Room Temp~200/300℃ | Rotation Speed: | 50-250rpm |
Power(W): | 3KW(without Power) | Heat Exchange Surface: | 0.12㎡ |
Vacuity: | 0.001mbar | Dimension(L*W*H): | 1100*500*1750mm |
Feed Amount: | 4000~12000(ml/h) | ||
High Light: | vacuum distillation equipment,essential oil distillation equipment |
3 KW Power Vacuum Distillation Machine for CBD / Hemp oil / THC
—— Particular features
Continuous distillation process.
Very low operating pressures up to 0.1Pa (100Pa=1mba). (The considerably lower pressure in the short path evaporator is obtained by the short distance for the vapours on their way from the evaporator surface to the condenser. )
The very low operating pressures ensure very low distillation temperatures and therefore a very gentle distillation is possible.
Short residence time. (Thanks to the short residence time, the low evaporation temperature and the immediate cooling of the concentrate, thermal stress and decomposition of the product can be minimized.)
High evaporation rates.
TYPE | DZL-10 |
MATERIAL | stainless steel 304 |
TEMPERATURE | Room temp~200/300 ℃(depend on the Electric heater) |
DIAMETER | 100 (mm) |
HEAT EXCHANGER HTA | 0.12 (m2) |
INNER CONDENSING HTA | 0.2(m2) |
FEED AMOUNT | 4000~12000 ( ml/h) |
ROTATION SPEED | 50-250rpm |
FILM SYSTEM | Wiped Filming System |
VACUITY | 0.001mbar(depend on the nature of material and vacuum pump) |
COLD TRAP | Liquid nitrogen |
FLOOR AREA | length*width*height=1100*500*1750 (mm)(without pump) |
POWER | 3KW (without pump) |
VOLTAGE | 220V-60HZ |
Vacuum distillation is a method of distillation performed under reduced pressure. As with distillation, this technique separates compounds based on differences in boiling points. This technique is used when the boiling point of the desired compound is difficult to achieve or will cause the compound to decompose. A reduced pressure decreases the boiling point of compounds. The reduction in boiling point can be calculated using a temperature-pressure nomograph using the Clausius–Clapeyron_relation
Contact Person: sales