Payment & Shipping Terms:
|Material:||Stainless Steel 304/S316L||Column Size:||DN50*800-1600mm|
|Distillation Column Type:||Packed Tower||Floor Area:||Length*width*height=1000*800*2700-3500 (mm)|
lab distillation column,
chemical distillation equipment
1.5 m2 Condenser HTA Distillation Column for CBD / THC / Hemp oil / Cannabissativa
Continuous distillation process.
Low operating pressures (100~10000Pa ,100Pa=1mbar).
Short residence time.
High evaporation rates.
Processing of high-boiling, high-viscosity or crystallizing products is possible.
Can be used as a reboiler for column.
Low fouling on evaporator wall.
|Material||stainless steel 304/S316L|
Distillation column type
|Temperature||Room temp~200/300 ℃(depend on the oil heater)|
|Condenser HTA||1.5 (m2)|
|Vacuity||MIN:1mbar(depend on the nature of material and vacuum pump&vacuum pump not included)|
|Floor area||length*width*height=1000*800*2700-3500 (mm)|
Distillation columns are made up of several components, each of which is used either to tranfer heat energy or enhance materail transfer. A typical distillation contains several major components:
a vertical shell where the separation of liquid components is carried out
column internals such as trays/plates and/or packings which are used to enhance component separations
a reboiler to provide the necessary vaporisation for the distillation process
a condenser to cool and condense the vapour leaving the top of the column
a reflux drum to hold the condensed vapour from the top of the column so that liquid (reflux) can be recycled back to the column
The vertical shell houses the column internals and together with the condenser and reboiler, constitute a distillation column. A schematic of a typical distillation unit with a single feed and two product streams is shown below:
Contact Person: sales