Payment & Shipping Terms:
|MATERIAL:||Stainless Steel||NAME:||Waste Cutting Oil Distillation Equipment|
|ROTATION SPEED:||80-390rpm||FEED AMOUNT:||2000~6000 ( Ml/h)|
|VACUITY:||0.001mbar||DESIGN:||Wiped Film Evaporator Design|
solvent distillation equipment,
short path distillation unit
Stainless Waste Cutting Oil Distillation Equipment Wiped Film Evaporator Design
Waste Cutting Oil Distillation Equipment Introduction
molecular distillation is a special liquid -liquid separation technology ,which is different from traditional distillation on the difference boling point.This is a kind of distillation in high vacuum enviroment ,for the difference of material molecular movement free path,was carried out in the heat sensitive material or high boiling point material distillation and purification process.Short path Distillation is mainly used in chemical ,pharmaceutical,petrochemical ,spices,plastics,oil and other fields.
Waste Cutting Oil Distillation Equipment Design
Different from the traditional wiped film evaporator design, the condenser is located inside the Short Path Distillation Equipment body.
Waste Cutting Oil Distillation Equipment Parameters
|MATERIAL||stainless steel 316|
|TEMPERATURE||Room temp~200/300 ℃(depend on the Electric heater)|
|HEAT EXCHANGER HTA||0.058 (m2)|
|INNER CONDENSING HTA||0.065 (m2)|
|FEED AMOUNT||2000~6000 ( ml/h)|
|FILM SYSTEM||Wiped Filming System|
|VACUITY||0.001mbar(depend on the nature of material and vacuum pump)|
|COLD TRAP||Liquid nitrogen|
|FLOOR AREA||length*width*height=1100*500*1750 (mm)(without pump)|
|POWER||2KW (without pump)|
Let’s take a look at how the Short Path Distillation Equipment works.
Where other methods employ solvents to help the extract material move or flow through the Short Path Distillation Equipment, these systems take advantage of the melting points of cannabinoids instead. These compact systems are set up with a feed vessel sending extract material into a heated evaporation vessel. Inside this evaporation vessel is a rotating wiper blade that evenly distributes the extract material onto the vessel walls. The extract material only spends a short amount of time on the wall to limit heat exposure and any degradation to the material.
Inside the evaporation vessel at the center is an internal condenser. This is where the various parts of the extract material are split up and concentrated. The close proximity of the condenser to the heated vessel wall provides a short path for the extract to travel to. Hence the name Short Path Distillation Equipment. As the wiper system moves the extraction material down through the vessel, it evaporates to the condenser which converts it back to a liquid. This liquid is then collected at the bottom and is now a distillate.
Heavier material like the chlorophyll, sugars, salts, and wax fractions are unable to evaporate off the surface of the evaporation vessel wall and so they travel, via the wiper blades, into a separate container which is also at the bottom. A separate and chilled evaporator captures the terpenes in their own flask.
Contact Person: Ji