Payment & Shipping Terms:
|MATERIAL:||Stainless Steel||Name:||Solvent Recovery Machine|
|DIAMETER:||800 (mm)||HEAT EXCHANGER HTA:||5(m2)|
|FEED AMOUNT:||320 L/H||VACUITY:||50mbar|
solvent recovery distillation units,
solvent recycling machine
Stainless Steel Solvent Recovery Machine Heat Exchange Surface 320 L/H
What is a solvent recovery or Solvent Recovery Machine ?
Pilot Plant Fabrication A solvent recovery system is a process system that takes effluent and extracts useful raw materials back out of the process waste stream. They can reduce the demand for raw materials, by recovering chemicals that can be reused in production, or used to flush the system between runs. They can also help manufacturers meet regulatory requirements or process standards by cleaning waste streams before they are released from the plant.
The recovery of solvents from effluent can be achieved with a variety of technologies. A common one is solvent distillation systems, but liquid-liquid extraction, absorption systems, film evaporation, crystallization, and membrane separation can also be used, depending on the application.
Solvent Recovery Machine Design
Horizontal or vertical shell-and-tube heat exchanger or plate heat exchanger, with flash vessel/separator and circulation pump.
Solvent Recovery Machine Operation
The liquid is circulated through the heat exchanger by means of a circulation pump, where it is superheated at an elevated pressure, higher than its normal boiling pressure. When entering the separator, the pressure in the liquid is rapidly reduced resulting in some of the liquid being flashed, or rapidly boiled off.
Since liquid circulation is maintained, the flow velocity in the tubes and the liquid temperature can be controlled to suit the product requirements of the pre-selected temperature difference.
|TYPE||DEA-W-400 Solvent Recovery Machine|
|TEMPERATURE||Room temp~200 ℃(oil heating not included )|
|HEAT EXCHANGER HTA||5(m2)|
|FEED AMOUNT||320 (L/h) solvent|
|VACUITY||50mbar(depend on the nature of material and vacuum pump)(vacuum pump not included)|
|FLOOR AREA||length*width*height=2000*1500*3500 (mm)(without pump)|
|POWER||80KW (without vacuum pump)|
Shanghai Dea chemical equipment Co.,Ltd
—— We devote to design and develop the equipment of chemical separation and abstraction.
—— We came from East China University of Science and Technology, which we long-term cooperated with later. And now, we serve for many famous universities, such as Tsinghua University , Sun Yat-sen University , etc.
—— We provide equipment of distillation and extraction for the technicians in the area of chemical medicine and food industry.
—— We own senior engineers who have rich experience in chemical engineering.
—— Our products can be used in lab-scale, pilot-scale experiments and small-scale production.
—— The experimental results are more authentic by using our products thanks to the continuous operation during the course of the experiments or pilot-scale experiments.
—— We repaire imputed equipments out-of-warranty for UIC,POPE,BUCHI in the past few years, which made us accumulating rich experience.
Contact Person: Ji