Payment & Shipping Terms:
|Name:||Solvent Recovery Distillation Units||Application:||Ethanol|
|DIAMETER:||800 (mm)||HEAT EXCHANGER HTA:||5(m2)|
|FEED AMOUNT:||320 (L/h) Solvent||VACUITY:||50mbar|
solvent recovery distillation units,
solvent recycling machine
Ethanol Solvent Recovery Distillation Units , Oil Solvent Recovery Equipment
Solvent Recovery Distillation Units Design
Horizontal or vertical shell-and-tube heat exchanger or plate heat exchanger, with flash vessel/separator and circulation pump.
Solvent Recovery Distillation Units Operation
The liquid is circulated through the heat exchanger by means of a circulation pump, where it is superheated at an elevated pressure, higher than its normal boiling pressure. When entering the separator, the pressure in the liquid is rapidly reduced resulting in some of the liquid being flashed, or rapidly boiled off.
Since liquid circulation is maintained, the flow velocity in the tubes and the liquid temperature can be controlled to suit the product requirements of the pre-selected temperature difference.
Solvent Recovery Distillation Units features
Less foul – boiling/evaporation will not take place on the heating surfaces, but in the separator. Fouling due to incrustation and precipitation in the calandria is therefore minimized.
Optimized heat exchange surface – flow velocity in the tubes determined by the circulation pump.
Solvent Recovery Distillation Units application
Liquids with a high tendency for fouling, highly viscous liquids, as the high concentration step in multiple-effect evaporation plants.
Forced circulation evaporators are suited as crystallizing evaporators for saline solutions.
Solvent Recovery Distillation Units Parameters
|TYPE||DEA-W-400 Solvent Recovery Distillation Units|
|MATERIAL||stainless steel 304|
|TEMPERATURE||Room temp~200 ℃(oil heating not included )|
|HEAT EXCHANGER HTA||5(m2)|
|FEED AMOUNT||320 (L/h) solvent|
|VACUITY||50mbar(depend on the nature of material and vacuum pump)(vacuum pump not included)|
|FLOOR AREA||length*width*height=2000*1500*3500 (mm)(without pump)|
|POWER||80KW (without vacuum pump)|
Contact Person: Ji