Payment & Shipping Terms:
|Name:||Thin Film Distillation||After-sales Service Provided:||Video Technical Support, Online Support, Engineers Available To Service Machinery Overseas|
|Product Type:||Medical Hemp Distillation Equipment||Dimension(L*W*H):||1000*800*2700-3500 Mm|
|Power(W):||0.5KW(without Pump)||Material:||Stainless Steel 304|
|Heat Exchange HTA:||0.12m2||Vacuity:||MIN:10mbar|
Continuous Feed Thin Film Distillation / Vacuum Evaporation Equipment
Feed liquid is admitted into still under high vacuum, immediately spread into a very thin film and forced quickly down the evaporation surface. Heated walls and high vacuum drive the more volatile components (distillate) to the external condenser as the less volatile components (residue) continue down the cylinder. The resulting fractions, thus separated, exit through individual discharge outlets. Depending on application, the desired product is either the distillate or the residue fraction. Small amounts of condensable low MW compounds collect in cold trap upstream of vacuum system. For high solvent loads, an optional external condenser may be installed immediately downstream of the still.
Continuous distillation process.
Low operating pressures (100~10000Pa ,100Pa=1mbar).
Short residence time.
High evaporation rates.
Processing of high-boiling, high-viscosity or crystallizing products is possible.
Can be used as a reboiler for column.
Low fouling on evaporator wall.
|Type||JZ-80-T Thin Film Distillation|
|Material||stainless steel 304|
|Temperature||Room temp~200/300 ℃(depend on the oil heater)|
|Internals||10-20 Sieve tray columns.|
|Condenser HTA||0.86 (m2)|
|Vacuity||MIN:10mbar(depend on the nature of material and vacuum pump&vacuum pump not included)|
|Floor area||length*width*height=1000*800*2700-3500 (mm)|
Contact Person: Ji