Payment & Shipping Terms:
|TEMPERATURE:||Room Temp~ 150/250 ℃(depend On The Electric Heater )||DIAMETER:||300 (mm)|
|HEAT EXCHANGER HTA:||1.0 (m2)||MATERIAL:||Stainless Steel 304/S316L|
|VACUITY:||0.5mbar(depend On The Nature Of Material And Vacuum Pump)(vacuum Pump Not Included)||VOLTAGE:||400V/60hz|
agitated thin film evaporator,
thin film evaporator lab scale
1KW Power Thin Film Evaporator for CBD / THC / Hemp oil / Cannabissativa
Wiped Film Evaporators are horizontal evaporator with wiper basket, gear motors and external condenser.
The vapour nozzle is typically arranged at the upper end of the evaporator in order to facilitate the transfer of the vapours to the external condenser.
Dea offers thin film evaporators from 0.058 to 3 m2 .
|MATERIAL||stainless steel 304/S316L|
|TEMPERATURE||Room temp~ 150/250 ℃(depend on the Electric heater )|
|HEAT EXCHANGER HTA||1.0(m2)|
|FEED AMOUNT||40~120( l/h)|
|FILM SYSTEM||Wiped Filming System|
|VACUITY||0.5mbar(depend on the nature of material and vacuum pump)(vacuum pump not included)|
|FLOOR AREA||length*width*height=1200*1000*3500 (mm)|
|POWER||1KW (without pump)|
Thin film evaporators have been developed to purify temperatures sensitive products by evaporation. The temperature sensitive product can be both the high and the low boiling component in the mixture. The target was to operate at low evaporation temperatures means low vacuum and to minimize the residence time of the product in the Thin film evaporator. In order to reduce the evaporation temperature at the heated evaporation surface as far as possible the pressure incl. the hydrostatic pressure due to the liquid product itself should be minimized.
Contact Person: sales